Regular price $419.00 $275.00 Sale

 Run Dry Protection to Keep You Cool

   The PM500 is a magnetically driven pump with no shaft seal. The pump is epoxy encapsulated, which allows the PM pump to run fully submerged in many liquids or in open air for complete moisture protection. When re-assembling the pump for service, make sure all “O“ rings are properly seated. See the repair parts list for a breakdown of replacement parts.
  • Pumps 500 gallons/hr
  • Run Dry and Thermal Overload Protection
  • In a Run Dry scenario, the pump will shut down. Simply let it cool down or hose it down to assit
  • 115V & 230V
  • One Phase, all cords are six feet in length and are U.L.LISTED 18/3 wire
  • The pump is not self-priming and requires a flooded suction


 Maximum Flow  50Hz   gpm   8.5
 60Hz  gpm  8.5
 Overall Pump Dim. (LxWxH) 

 7.5 x 4.8 x 4.87in

 19 x 12.2x 12.3cm

 Inlet  3.4" FPT
 Outlet  1/2" MPT
 Maximum Internal Pressure  25 psi
 Maximum Liquid Temp.  130 F° (54 C°)
 Packed Weight  8.5 lbs (3.85 kg)
 Motor Type


 115V 60Hz

 230V 50/60Hz

 50Hz  Volts  115/230 
 Watts  100
 Amps  1.0
 Kw  0.037
 Rpm  2850
 60Hz  Volts  115/230
 Watts  120
 Amps  2.0/1.0
 Hp  1/20
 Rpm  3450